Log in Register

  • Cart: (empty)



No products

Shipping 0,00 €

0,00 € Tax

Total 0,00 €

Prices are tax included

Cart Check out

My Account

Log in




Add to cart

paiement CETELEM en 3 fois
766.33 € x 3
sans frais
paiement CETELEM en 4 fois
574.75 € x 4
sans frais
Availability:  Unavailable product
Delivery:  Contact us
Garantie : 2 ans pièces & main-d'oeuvre


The Minimoog Voyager Old School Synthesizer is a monophonic analog performance synthesizer. It has extensive patching facilities, and expanded modulation capabilities.The signal path starts with a bank of three wide-range, high-stability voltage controlled oscillators, one noise source and one audio preamplifier for externally-applied audio signals. The sound modifiers are two Moog filters and one stereo VCA (Voltage Controlled Amplifier).

Control devices include a 44-key keyboard with velocity and afterpressure outputs, pitch bend and modulation wheels and many control/pedal input jacks.The MINIMOOG® VOYAGER® OS has a hinged, multi-position panel and a solid hardwood cabinet. The power supply accepts any power voltage from 100 volts to 240 volts.

Oscillators Module
Three wide-range, high stability VCO’s (Voltage Controlled Oscillators) with continuously-variable waveforms. * FREQUENCY controls (2) vary the frequencies of Oscillators #2 and #3 over a +/-7 semitone range with respect to Oscillator #1.* OCTAVE selectors (3) set the frequency ranges of the oscillators in six octave steps.* WAVE controls (3) provide continuous control over the waveforms of the oscillators, from triangular, to sawtooth, to square, to narrow rectangular.* 1-2 SYNC switch synchronizes the Oscillator #2 waveform to the frequency of Oscillator #1, for dramatic timbral effects.* 3-1 FM switch provides linear frequency modulation of Oscillator #1 by Oscillator #3.* 3 KB CONT switch disconnects Oscillator #3 from control by the keyboard, thereby enabling it to function as a drone.* 3 FREQ switch lowers the frequency of Oscillator #3 into the sub-audio range, thereby enabling it to function as a low frequency audio or modulating oscillator.

Mixer Module

  • Five-input mixer for combining the audio sources prior to filtering.
  • Input Level controls (5) adjust the relative levels of the oscillator, noise, and external audio input signals.
  • Input switches (5) enable the player to quickly switch individual audio signals in and out.
  • External Level LED enables the player to set the correct external audio signal level.

Filters Module
Dual mode filter module includes dual lowpass and highpass-lowpass filtering. Dual lowpass mode consists of two Moog lowpass-resonant filters in parallel, one per output channel. Highpass-lowpass mode consists of Moog lowpass filter in series with a highpass filter.

  • CUTOFF control sweeps the frequencies of both filters throughout the audio range.
  • SPACING control sets the spacing between the frequencies of the two filters, over a +/-3 octave range.
  • RESONANCE control adjusts the resonance of both filters, from none (pure lowpass response) to filter oscillation.
  • KB CONT AMOUNT control sets how much the filters open and close as the player presses different keys on the keyboard.
  • Dual Lowpass/Highpass-Lowpass switch selects between dual lowpass operation or highpass-lowpass operation.

Envelopes Module
The Envelopes Module generates two wide-range ADSR (Attack Decay Sustain Release) envelopes. The Filter Envelope sweeps the filter and is available for modulation shaping. The Volume Envelope shapes the overall volume.

  • ATTACK controls (2) determine the attack times of the envelopes.
  • DECAY controls (2) determine the decay time constants of the envelopes.
  • SUSTAIN controls (2) determine the sustain levels of the envelopes.
  • RELEASE controls (2) determine the release time constants of the envelopes.
  • AMOUNT TO FILTER control determines how much the filter envelope will open and close the filter, from full negative (inverted envelope) to full positive (non-inverted envelope).
  • ENVELOPE GATE SWITCH selects whether the envelopes will be triggered by the keyboard, on , or by an externally-applied gate.

LFO Module

  • Low Frequency Oscillator generates triangular, square, Sample & Hold, and smoothed Sample & Hold waveforms for use as modulating signals
  • RATE control sets the LFO rate over the range 0.2 Hz (one cycle every five seconds) to 50 Hz (fifty times a second).
  • WAVE LFO selector selects Triangle, Square or Sample & Hold (Stepped or Smooth) waveforms for use with the Mod Busses.
  • RATE LED provides visual indication of the LFO rate.

Enhanced Modulation Busses Module

  • Selects the sources, destinations, and shaping signals for the two modulation busses.
  • SOURCE selectors (2) selects the modulation source from the LFO, Oscillator 1, Oscillator 2, Oscillator 3, noise or the external modulation input (MOD2).
  • DESTINATION selectors (2) selects the modulation destination from Pitch, Oscillator 2, Oscillator 3, the filter cutoff frequencies, the oscillator waveforms, or LFO Rate.
  • CONTROLLER selectors (2) selects the Mod Wheel, MOD1, Velocity, Pressure, Filter Envelope or Volume Envelope to shape the modulation signal on that bus.
  • AMOUNT controls (2) sets the overall modulation amount for each bus.